SweepBoardby TRMLive demo
Run a drill from start to stand down
This is the real SweepBoard layout running an example two-floor store. Watch the 15-second version, or take the controls: start a drill on the controller board, then tap areas clear on the wardens’ phones.
- Raise itThe controller starts a drill or evacuation. The clock starts.
- Alert wardensEvery warden’s phone gets a push alert that opens their floor.
- SweepWardens tap each area clear, or log an issue, as they go.
- All clearThe time the last area was swept is stamped. Roll call is checked.
- Stand downThe full record is saved to the site’s drill history.
The board is on standby, as it would be on any normal day.
SweepBoardHarbour Street Store · example site
Standby00:00
Not swept yetClearSwept, issue logged
All areas clear--:--Waiting for the drill to start
Areas swept 0/10
Assembly point roll call
Live log
Nothing yet today.
Drill report
When the controller presses Stand Down, the report for this drill appears here: every area, who swept it and when, issues found, roll call and notes. In the app it prints straight to PDF.
Site records
Every drill and evacuation is kept for the site, ready for your fire risk assessor, insurer or inspecting officer. Export to CSV at any time.
| Date | Type | All clear | Stand down | Areas | Roll call |
|---|
What you just saw
In a real building it works exactly the same way
The demo runs in this page with example data. The real system does this across every warden’s phone, on your own floor plans.
Now see it on your own floor plans
A guided demo takes 30 minutes. A pilot takes one drill.